FutileAnsweredQuestions o You are annoyed by the constant led switching which also affects the audio filter ? It`s used to indicate that the exec scheduler is still alive. Read how to disable that. o The mouse pointer doesn`t move smooth but jumps around ? You have a lot debug output through on the serial or to the ram. o You wanna see debug output ? Use a serial terminal and set the maximum serial speed in the script. RTS/CTS *only*. No Xon/Xoff. I connected my Openstep4.2 PC with a nullmodem cable to my amiga and run in the shell. o You wanna see debug output but have no serial terminal ? Look into about which isn`t fully equal to a serial debug but should help in most cases. o You get graphic problems with ecs/aga demos/games ? Then the demos are hitting the blitter and that may cause problems due to timing problems between 68k and ppc. o The emulation does NOT care for hardcore hitting demos or games. If they work...fine...if not..too bad and wait for some UAE PPC port. The goal is that cybergraphics friendly programs work. o Does it work with the Toaster ? We don`t know but if it`s in our ability we hope we can support it. o Is coldreboot safe ? No..it isn`t at the moment because a 68k reset instruction does NOT cause a hardware reset. It`s only a soft reset but if a soft reset is caused and accidently some left over interrupt condition is pending from some hardware we may run into a deadlock.